Custom made light bar brackets for all 3rd Gen 4runners (96-02) and 1st Gen Tacomas (96-04). These light bar brackets allow you to mount a 42" curved light bar above the windshield. They are laser ...
Info to know before you order:
The skid plates are uncoated raw steel. There may be small imperfections on the surfaces of the parts, such as small areas of surface rust or shallow scratches cause...
2021-2023 Bronco Modular Dual Swingout Rear Bumper (Fits All Packages)
This is a high clearance modular rear bumper designed to handle any adventure you throw at it!
Can’t purchase all the accessor...
Info to know before you order:
THIS IS A WELDED BUMPER!
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 ...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
The bumper was designed specifically for 3rd gen 4runne...
Know you are going to be wheeling hard with your new Bronco? Don't settle for body mounted rock sliders. These rock sliders mount directly to the frame and are designed to take a beating!
With 3 le...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There ma...
Info to know before you order:
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 inches off the front of the...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
The plate bumper was designed specifically for 3rd gen ...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There ma...
Stickers add horsepower!!! Show your support for True North Fabrications by rocking these awesome diecut vinyl stickers! Cut from 2.5 mil gloss white vinyl that holds up great against all types of ...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
This bumper will not work with body lifts without leavi...
Designed to sit off of a 1.75" diameter tube, these Hi Lift mounts can be added to almost any bumper/cage application. 3/8 SteelIncludes grade 8 hardware
Custom made light bar brackets for all 4th gen 4runners (05-09). These light bar brackets allow you to mount a 50" curved light bar above the windshield. They are laser cut and press bent out of 11...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension-lifted vehicles.
There ma...
Info to know before you order:
THIS IS A WELDED BUMPER!
In order to get the tightest fitment and strongest mounting design possible, there is some modification required. You will have to trim 2 ...
Info to know before you order:
THIS IS A DIY (DO IT YOURSELF) KIT! It is shipped as multiple pieces and the customer welds it themselves.
This is NOT A WINCH BUMPER. There is no room or mountin...
Featuring our 2022+ 3rd Gen Tundra 3/16" steel engine skid plate!
Works with all 22+ 4×4 Tundra models
8 mounting points to factory bolt locations
Mounts to radiator cross-member
Easy access to o...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There ma...
Info to know before you order:
THIS IS A DIY KIT!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There may be s...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There ma...
Info to know before you order
Weld on kit sliders with kickout for 3rd generation Tacomas. Round tubing is made out of 1.75" OD 11 gauge ERW. Square tubing is 2"x2" 11 gauge. Mounting plates and g...
Info to know before you order:
THIS IS A WELDED BUMPER!
This bumper will not work with body lifts without leaving a gap. It will work with stock height and suspension lifted vehicles.
There m...
Info to know before you order:
Modular design with separate winch plate and bolt on outer wings!
A little about the bumper:
This bumper features a modular design. What does that mean? The shel...
