2004-2006 1st Gen Tundra Lower Uniball Conversion Heim Steering

DOES NOT FIT 2000-2003 Tundras.

CNC machined AISI 1018 billet steel construction.

Lower uniball conversion is designed to upgrade the factory ball joint with added strength and durability.

Built in locating pins and registering center ring lock into the spindle and lessen the shear load on the mounting hardware.

Designed to reduce bump steer and improve steering geometry.

100% bolt on and fully rebuildable.

Lower control arm tapered adapters are included. Bolts to stock Toyota LCA's or TC lower control arms.

Double shear tie rod tabs are pre-welded. The tab inner spread is 2.125".

Can not be installed with factory outer tie rods.

Designed for use with the TC heim steering upgrade (PT# 96085-OE or 96099) which utilizes a 7/8" heim, 5/8" bolt, and misalignment spacers to fit 2.125" double shear tab spacing.

Black Cerakote coating to maximize corrosion resistance.

Mounting hardware is included.

NOTE: These lower uniball conversions are designed to be installed on a vehicle with 2"-3" of suspension lift. Installing them on a vehicle with more or less lift height may result in alignment issues.

NOT COMPATIBLE WITH MANUAL LOCKING HUBS. LOWER UNIBALL CONVERSION W/ TC HEIM STEERING (SOLD SEPARATELY) - LEFT

LOWER UNIBALL CONVERSION W/ TC HEIM STEERING (SOLD SEPARATELY) - RIGHT

HARDWARE KIT