96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons
96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons
96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift - Dobinsons

1996-2002 3rd Gen 4Runner Dobinsons 2-2.5" MRR 3-Way Adjustable Lift

$2,970.00
$2,970.00
Sale Sold Out
/
Title :
This is a pre order item. We will ship it when it comes in stock.
Dobinsons

SKU: 96978

*MRR 3-Way Adjustable front struts [MRA59-A222] and rear shocks [MRA59-A225] included!

Front Coil Spring Specs:

  • C59-276 - 2.0" Lift Coils - Stock Load
  • C59-134 - 2.5" Lift Coils Stock Load / 2.0" Lift Coils - 110lb Load
  • C59-238 - 2.5" Lift Coils - 110lb Load

Rear Coil Spring Specs:

  • C59-131 - 2" Lift Stock Load
  • C59-137V - 2" Lift Variable Rate Heavy Load 220LBS+
  • C59-297V - 2" Lift Variable Rate Heavy Load 440LBS+

Product Overview:

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression - For creepy crawling and cornering
  • 15 Stage Rebound - Control your coils, prevent bucking
  • 50mm/60mm CNC Machined High Flow Billet Aluminium Race Piston
  • 2.2" Diameter precision honed shock bodies with HD 3mm thick walls
  • Upgraded 3 Stage FKM-HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • ParkerTM Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
  • 60mm Full 6063 aluminum remote reservoir 
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • MRA59-A222 shocks are designed with a 473mm extended length, which falls under the category of extended travel. As a result, they will require aftermarket upper control arms and a differential drop kit for proper installation and performance.

Note: Coil seat should be set at 164mm (6.45") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.