96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons
96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons
96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons
Load image into Gallery viewer, 96-02 3rd Gen 4Runner Dobinsons 2.5" IMS Lift Kit - Dobinsons

2002-2009 GX470 Dobinsons 1.5-3" IMS Lift Kit

$1,805.00
$1,805.00
Sale Sold Out
/
This is a pre order item. We will ship it when it comes in stock.
Dobinsons

SKU: DSSKITIMS002

*Monotube IFP front struts included [IMS59-50220]

Front Coil Spring Specs:

  • C59-300 - V8 - 1.5" Lift, Stock front end load
  • C59-302 - V8 - 2" lift, Stock front end load
  • C59-314 - V8 - 2.5" lift, Stock front end load 
  • C59-352 - V8 - 2.0" lift, 110-220LBS front end load
  • C59-354 - V8 - 2.0 lift, 220-350LBS front end load

Rear Coil Spring Specs:

  • C59-323 - 0.5" lift, Stock rear end
  • C59-599 - 1" lift, Stock rear end
  • C59-505 - 1.5" lift, Stock rear end load
  • C59-325 - 2" lift, Stock rear end load
  • C59-327 - 2" lift, 200-400LB heavy rear load weight
  • C59-329 - 2" lift, 600-800lbs heavy rear load weight
  • C59-331 - 2" lift, 900-1000lbs super heavy rear load weight
  • C59-675V - 2" Stock Load (Variable Rate, Long Travel)
  • C59-677V - 2" 400lb Load / 3" Stock Load (Variable Rate, Long Travel) 
  • C59-701V - 2" 600lb Load / 3" 200lb Load (Variable Rate, Long Travel) 
  • C59-749V - 2" 800lb Load / 3" 400lb Load (Variable Rate, Long Travel) 
  • C59-849V - 2" 1000lb+ Load / 3" 600lb Load (Variable Rate, Long Travel)

Product Features:

  • Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  • Fully re-buildable and re-valvable
  • vZero shock fade in all terrains with full load
  • Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
  • Corrosion resistant (EDP Surface Protection)
  • Direct, bolt-on replacement for easy fitment
  • 2.2" Precision Honed Shock Body
  • 50mm hi-flow CNC 6061 Billet alloy piston
  • Heavy duty single piece lower leg
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated

Notes:

  • 2.5" or more of lift, new UCA's are recommended
  • Coil seat for IMS59-50220 should be set at 226mm(8.83") for 3 inchesof lift, for 2 inches of lift the coil seat should be set at 213mm(8.38") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.
  • KDSS Vehicles may not use long travel or lift more than 2" due to KDSS system complications.
  • For a lift of 3" in the rear, new extended brake lines and minimum of 2" bump stop extensions are required to be used with our long travel rear shocks.  At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.